Canadian Woodworking
Purpleheart

Purpleheart

Peltogyne spp.

Author: Peter MacSween

The memories of my first encounter with Purpleheart are still strong. After years of working with domestic woods, it was hard to believe wood could be that colour. Seeing Purpleheart opened up the world of exotic woods to me. New woods meant new ideas and new projects to imagine and to build.

It’s not only its colour that make Purpleheart an impressive species. It is a truly large tree growing to 170 feet in height with diameters of 5 feet. The trunk is often buttressed at ground level and can stretch upwards for 75 feet before any branches are encountered. These trees can produce large amounts of clear lumber in decent lengths and widths.

Purpleheart

Purpleheart

Purpleheart

Purpleheart end-grain

There are over 20 species of Purpleheart in the genus Peltogyne, with all of them exhibiting a different shade of purple in the heartwood. Purpleheart grows in tropical Central and South America from Mexico south to the Amazon Basin in Brazil. Mexico can claim one species of Peltogyne, while the rest of the harvested species come from Brazil and neighbouring countries.

The purple colour of the heartwood is the result of extractives the tree deposits in the heartwood as it grows. These chemicals, while appealing to woodworkers, serve to make the heart resistant to insect and fungal attack. Purpleheart is a wood well suited to exterior applications, and it is used for framing, dock pilings and even train track ties in its native countries. The sapwood is a creamy grey and is distinct from the heart.

The wood is straight grained with a natural luster. It is not uncommon to encounter interlocked or irregular grain, which can make the wood hard to work. Purpleheart is also heavy, dense and very strong. These characteristics can add to the burden of working with it. If you use dull tooling and slow feed rates, the wood can be heated until it releases resins that can clog blades and cutter heads. Purpleheart can burn when being routed and these burnt areas are difficult to sand out given the wood’s hardness.

Woodworkers should use sharp tools and monitor cutter speeds for burning. Screws should be predrilled and, to be honest, I wouldn’t even try nailing it. It glues well, although too much clamp pressure can squeeze out glue and starve the joints. Some woodworkers recommend wiping fresh cut surfaces with acetone or lacquer thinner to remove any resins that can interfere with a successful glue up.



In the end, it all comes down to showcasing that bright purple colour. First of all, when selecting Purpleheart, try to use a single species. The 20 or so species all have a subtle colour of their own and often are mixed together when sold. The heartwood of all species is a purply to brownish grey and will only turn to purple once it is cut. Over time with exposure to air and light the bright purple heartwood will change to very attractive purple brown.

You can’t stop this colour transition, but you can slow it down by using a film finish with UV light inhibitors. Water based film finishes will dry clear and will also not yellow over time. If you want to use an oil-based finish that is absorbed into the wood, it must offer UV protection as well. These finishes do not offer the same colour protection as film finishes. The colour can be revived by sanding or using a plane on any oxidised surfaces, although this isn’t always possible with finished pieces.

Purpleheart can be visually overwhelming if it is used on large surfaces. Most woodworkers use it as a colour accent or detail. It is very common in inlays, small decorative objects, pool cues and other turnings. It is a good choice for flooring if you are willing to wait for the colour change or as accents in parquet. It is also sliced into veneer and has been used in architectural applications. Other applications include marquetry, knife scales and musical instruments.

Purpleheart is facing export restrictions in some countries due to overharvesting. But the population as a whole is not considered threatened and there should be plenty of Purpleheart for many years to come. The price is attractive for an imported exotic; so the next time you are at your favourite wood shop, feel free to indulge your fantasies and purchase some of this outstanding wood.

More about Purpleheart

The Wood Database specifications: Purpleheart
Published:
Last modified: July 18, 2022

Peter MacSween - [email protected]

Peter's woodworking journey began with a career in carpentry followed by a decade buying and selling veneer. His spare time is spent abusing his guitars and exploring the great outdoors.


Leave a Reply

Your email address will not be published.

More woods to explore
Clicky